elcom
Flat Belt conveyor C40
The flat belt conveyor 40 from elcom is a compact conveyor designed on a 40 mm profiles, and a Ø 40 mm pulley. It can fit for all types of part thanks to the wide range of belts (Widths available from 40mm to 400mm) and speed drive portfolio (2 to 24 m/min)
Stainless steel underside available as an option
The different types of C40 conveyors
There are six types of belt conveyors with a diameter of 40 mm that can be identified :
- Belt conveyors diameter 40 with central drive :
These conveyors feature a centrally positioned drive along the conveyor. This allows for efficient power transmission and ensures smooth belt movement.
- Belt conveyors diameter 40 with drive at the end :
In this case, the drive is positioned at one end of the conveyor. This configuration is suitable for applications where it is necessary to free up the central space of the conveyor.
- Belt conveyors diameter 40 with drive at the motor end below :
This type of conveyor is similar to the previous one, but the motor is placed below the belt. This allows a reduced footprint and facilitates access to the upper part of the conveyor.
- Belt conveyors diameter 40 with double belt and central drive:
These conveyors are equipped with two parallel belts and a central drive. This configuration is used when two product streams must be transported simultaneously
- Belt conveyors diameter 40 with double belt, internal central motor drive:
These conveyors are similar to the previous type, but the motor is integrated inside the conveyor. This allows a reduced footprint and easier integration into existing installations.
- Belt conveyors diameter 40 with double belt and drive at the end :
In this case, the conveyor is equipped with two parallel belts and the drive is positioned at one end of the conveyor. This configuration is suitable for applications requiring the transport of two independent product streams.
These different types of 40 diameter belt conveyors offer solutions adapted to the specific needs of the applications. They can be used in various sectors such as manufacturing, automation, logistics and many more.
Belt conveyors diameter 40 central drive
The 40 mm conveyor has the following technical characteristics:
- Smooth belt: The conveyor is equipped with a smooth belt which allows smooth and regular transport of parts. The smooth surface reduces friction and ensures optimal conveyor efficiency.
- Central drive: The conveyor drive is centrally positioned along the profile. This arrangement allows for efficient power transmission and ensures uniform movement of the belt.-
- Available widths: The conveyor is available in different widths to accommodate various part types. The widths offered are 40 mm, 80 mm, 120 mm, 160 mm, 200 mm, 250 mm, 300 mm and 400 mm.- Compact conveyor: The conveyor is compactly designed and uses 40mm base profiles. This allows easy integration into tight spaces while ensuring efficient transport of different types of parts.
- Adjustable Drive Position: The position of the drive can be adjusted along the profile to suit specific application needs. This provides flexibility during installation and helps optimize conveyor operation.
- Pulleys mounted on ball bearings: The conveyor pulleys are mounted on high quality ball bearings. This reduces friction and ensures smooth belt movement, contributing to the reliability and durability of the conveyor.
- Stainless steel base: The conveyors are supplied with a stainless steel base as standard for widths from 200 mm to 400 mm. This ensures corrosion resistance and is particularly suitable for demanding environments. A stainless steel base is also available as an option for other widths.
Regarding the dimensions and motors of the conveyor :
- Width A: Available in 40 mm, 80 mm, 120 mm, 160 mm, 200 mm, 250 mm, 300 mm et 400 mm.
- Length L: Adjustable from 400 mm to 6,000 mm.
- Band width: A – 5 mm.
- Strip length (Lc): Calculated using the formula (2xL+375) x 0.992.
- Profile length (LP): Calculated by subtracting 50 mm from the total length (L).
The conveyor can be powered by different motors:
- Power supply: 230 V single-phase and 230/400 V three-phase.
- Speed (m/min) +/- 10%: 2, 3, 6, 9, 12, 18, 24.
- 24 VDC option available on request.
Regarding the characteristics of the bands:
- Recommended installation tension: Maximum 0.5%.
These technical characteristics guarantee reliable performance adapted to the specific needs of applications requiring the use of belt conveyors with a diameter of 40 mm.
Belt conveyors diameter 40 end drive
Technical characteristics :
- Smooth belt: The 40 diameter belt conveyors are equipped with a smooth belt which ensures smooth and regular transport of parts. This configuration is particularly suitable for the use of cleated belts for the transport of specific products.
- End Drive: The conveyor drive is positioned on an end pulley. This configuration frees up central conveyor space, which can be advantageous for additional operations or the integration of other equipment.
- Available Widths: 40 diameter end drive belt conveyors are available in different widths to accommodate various part types. Widths offered include 40mm, 80mm, 120mm, 160mm, 200mm, 250mm, 300mm and 400mm.
- Compact conveyor: These conveyors are compactly designed and use 40mm base profiles. This allows easy integration into small spaces while ensuring efficient transport of different types of parts.
- Suitable for cleated belts: Belt conveyors with a diameter of 40 with end drive are particularly suitable for the use of cleated belts. These belts allow bulk or particularly shaped products to be transported in a secure and stable manner.-
- End Pulley Drive: The conveyor drive is located on a pulley mounted at the end of the conveyor. This configuration ensures efficient power transmission and smooth belt movement.
- Steel pulleys mounted on ball bearings: The conveyors are equipped with steel pulleys mounted on high quality ball bearings. This design ensures smooth operation, reduces friction and contributes to the reliability and durability of the conveyor.
- Stainless steel base: The conveyors are supplied with a stainless steel base as standard for widths from 200 mm to 400 mm. This option guarantees corrosion resistance and is particularly suitable for demanding environments. A stainless steel base is also available as an option for other widths.
Dimensions and engines :
- Width A: Available in 40mm, 80mm, 120mm, 160mm, 200mm, 250mm, 300mm and 400mm.
- Length L: Conveyors can range in length from 400mm to 6,000mm, providing flexibility in choosing the right length for the application.
- Belt width: The width of the belt corresponds to width A minus 5 mm, ensuring a precise fit for optimal transport of parts.
- Strip length: The length of the strip is calculated according to the following formula: Lc = (2xL+132).
- Overall length: The overall length of the conveyor is defined by the formula Lh = L + 42 + 2 x belt diameter + tension.
- Profile length: The length of the profile is determined by the formula LP = L – 52.5.
Engines:
- The conveyors are available with a power supply of 230 V single phase and 230/400 V three phase to meet the needs of different installations.
- The movement speeds offered are 2 m/min, 3 m/min, 6 m/min, 9 m/min, 12 m/min, 18 m/min and 24 m/min, with a tolerance of +/- 10 %.
On request it is possible to obtain a 24 VDC power supply for the conveyor
Bands:
- The recommended installation tension for the strip is 0.5% maximum, ensuring good hold of the strip while avoiding overtension problems.
- Conveyors can use polyurethane belts with a maximum diameter of 1.3 mm.
- The maximum belt stiffness at 1% tension is 5 N/mm, which ensures sufficient flexibility to accommodate variations in load and tension.
With their detailed technical characteristics, the 40 diameter belt conveyors with end drive offer a reliable and versatile solution for transporting parts in different industrial sectors. Their compact design, combined with width, length and motorization options, allows them to be adapted to various applications and specific requirements
Belt conveyors diameter 40 motor end drive below
Technical characteristics
- Smooth belt: The 40 diameter belt conveyors with drive at the end and motor underneath are equipped with a smooth belt which allows regular and smooth transport of parts.
- Motor below: The motor is positioned below the conveyor, thus facilitating its integration into various configurations and allowing a reduced footprint.
- Toothed belt drive: The conveyor is driven by a toothed belt with a pitch of 5 mm and a width of 32 mm. This configuration ensures efficient transmission of motor power to the conveyor belt.
- Steel pulleys mounted on ball bearings: The conveyors are equipped with steel pulleys mounted on high quality ball bearings. This ensures smooth operation, reduces friction and contributes to the reliability and durability of the conveyor.
- Stainless steel base: The conveyors are supplied with a stainless steel base as standard for widths from 200 mm to 400 mm. This option ensures corrosion resistance and is particularly suitable for demanding environments. A stainless steel base is also available as an option for other widths.
Dimensions and engines :
- Width A: Available in 40mm, 80mm, 120mm, 160mm, 200mm, 250mm, 300mm and 400mm to suit different room sizes.
- Length L: Conveyors can range in length from 400mm to 6,000mm, providing flexibility in choosing the right length for the application.
- Belt width: The width of the belt corresponds to width A minus 5 mm, ensuring a precise fit for optimal transport of parts.
- Strip length: The length of the strip is calculated according to the following formula: Lc = (2xL+132).
- Overall length: The overall length of the conveyor is defined by the formula Lh = L + 42 + 2 x belt diameter + tension.
- Profile length: The length of the profile is determined by the formula LP = L – 52.5.
- The conveyors are available with a power supply of 230 V single phase and 230/400 V three phase to meet the needs of different installations.
- The movement speeds offered are 2 m/min, 3 m/min, 6 m/min, 9 m/min, 12 m/min, 18 m/min and 24 m/min, with a tolerance of +/- 10 %.
- On request, it is possible to obtain a 24 Vcc power supply for the conveyor.
Engines
Bands
- The recommended installation tension for the strip is 0.5% maximum, ensuring good hold of the strip while avoiding overtension problems.
40 diameter belt conveyors with end drive and motor underneath are designed to meet the needs of transporting parts in various industrial applications. Their compact design, combined with width, length and motorization options, makes them a versatile and reliable solution to optimize your handling operations.
BELT CONVEYORS DIAMETER 40 CENTRAL DRIVE DOUBLE BELT
40 diameter belt conveyors with double belt central drive offer an efficient solution for transporting wide parts while optimizing the space between the two belts. These conveyors are driven by a single motor, which allows economical use of energy while ensuring optimal performance.
Technical characteristics
- Two parallel conveyors: The conveyors are designed with two parallel belts that operate in synchronization, providing increased capacity for transporting wide parts.
- Central drive: Both belts are driven by a single motor, centrally positioned, which ensures a balanced distribution of driving power on both belts.
- Adjustable drive position: The position of the drive can be adjusted along the profile according to the specific needs of the application, allowing optimal adaptability.
- Center distance between the two conveyors: The center distance between the two conveyors can be adapted according to the specific requirements of the application, making it possible to effectively manage the free space between the two belts.
- Stainless steel base: A stainless steel base is available as an option, providing corrosion resistance and increased durability for demanding environments.
Dimensions and engines
- Width A: Available in 40 mm and 80 mm to adapt to the different widths of parts to be transported.
- Length L: Conveyors can range in length from 400mm to 6000mm, providing flexibility in choosing the appropriate length for the application.
- Belt width: The width of the belt corresponds to width A minus 5 mm, allowing precise adjustment for optimal transport of parts.
- Strip length: The length of the strip is calculated according to the following formula: Lc = (2xL+375) x 0.992.
- Profile length: The length of the profile is determined by the formula LP = L – 50.
Conveyor motorization
- The conveyors are available with a 230 V single-phase and 230/400 V three-phase power supply to suit different installations.
- The movement speeds offered are 2 m/min, 3 m/min, 6 m/min, 9 m/min, 12 m/min, 18 m/min and 24 m/min, with a tolerance of +/- 10 %.
- On request, it is possible to obtain a 24 Vcc power supply for the conveyor.
- The recommended installation tension for the strip is 0.5% maximum, ensuring good hold of the strip while avoiding overtension problems.
The detail of the bands
40 diameter belt conveyors with double belt central drive offer a versatile and efficient solution for transporting wide parts. Their robust design, combined with motorization and belt options, makes it possible to meet the specific needs of each industrial application. Top of form
BELT CONVEYORS DIAMETER 40 CENTRAL DRIVE DOUBLE BELT INTERNAL MOTOR
Technical characteristics
- Two parallel conveyors: The conveyors are equipped with two parallel belts that operate in synchronization, allowing the efficient transport of wide parts and providing high load capacity.
- Central drive: Both belts are driven by a single motor integrated into the conveyor, which ensures balanced driving power on both belts, ensuring smooth and efficient movement of parts.
- Adjustable drive position: The position of the drive can be adjusted along the profile according to the specific needs of the application, providing optimal flexibility and adaptation.
- Center distance between the two conveyors: The center distance between the two conveyors can be adapted according to the particular requirements of the application, making it possible to effectively manage the free space between the two belts and to adapt to different part sizes.
- Optional stainless steel base: An optional stainless steel base is available, providing corrosion resistance and increased durability, which is particularly useful in demanding environments.
Dimensions and engines
- Width A: Available in 40 mm and 80 mm, allowing parts of different widths to be transported.
- Length L: Conveyors can range in length from 400mm to 6000mm, providing flexibility in choosing the appropriate length for the application.
- Spacing between the belts (E): It can vary from 72 mm to 800 mm, allowing the space between the two belts to be adjusted according to the dimensions of the parts to be transported.
- Belt width: The width of the belt corresponds to width A minus 5 mm, allowing precise adjustment for optimal transport of parts.
- Strip length: The length of the strip is calculated according to the following formula: Lc = (2xL+375) x 0.992.
- Profile length: The length of the profile is determined by the formula LP = L – 50.
Conveyor motorization
- The conveyors are available with a 230 V single-phase and 230/400 V three-phase power supply, allowing adaptation to different electrical installations.
- The movement speeds offered are 2 m/min, 3 m/min, 6 m/min, 9 m/min, 12 m/min, 18 m/min and 24 m/min, with a tolerance of +/- 10 %.
- On request, it is possible to obtain a 24 Vcc power supply for specific applications requiring this voltage.
- The recommended installation tension for the strips is 0.5% maximum, ensuring adequate tension for optimal operation of the strips.
- The belts used are suitable for 40 diameter belt conveyors, offering excellent strength and durability.
- Other specific belt characteristics, such as maximum diameter and stiffness, can be specified based on application needs.
The detail of the bands
BELT CONVEYORS DIAMETER 40 DOUBLE BELT END DRIVE
Technical characteristics
- Two parallel conveyors: The conveyors are equipped with two parallel belts that operate in synchronization, allowing the efficient transport of wide parts and providing high load capacity.
- End pulley drive: The belts are driven by steel pulleys mounted on ball bearings located at the end of the conveyor. This guarantees smooth and regular movement of the transported parts.
- Optional stainless steel base: An optional stainless steel base is available, providing corrosion resistance and increased durability in demanding environments.
Dimensions
- Width A: Available in 40 mm and 80 mm, allowing parts of different widths to be transported.
- Length L: Conveyors can range in length from 400mm to 6000mm, providing flexibility in choosing the appropriate length for the application.
- Spacing between belts (E): The spacing between the two belts can be adjusted according to the specific needs of the application, with a range from 72 mm to 800 mm.
- Belt width: The width of the belt corresponds to width A minus 5 mm, allowing precise adjustment for optimal transport of parts.
- Strip length: The length of the strip is calculated according to the following formula: Lc = (2xL) + 132.
- Profile length: The length of the profile is determined by the formula LP = L – 52.5.
- The conveyors are available with a 230 V single-phase and 230/400 V three-phase power supply, which allows adaptation to different electrical installations.
- The movement speeds offered are 2 m/min, 3 m/min, 6 m/min, 9 m/min, 12 m/min, 18 m/min and 24 m/min, with a tolerance of +/- 10 %.
- On request, it is possible to obtain a 24 Vcc power supply for specific applications requiring this voltage.
Engines
Bands
- The recommended installation tension for the strips is 0.5% maximum, ensuring adequate tension for optimal operation of the strips.
Video of Flat belt conveyor C40
One question ?
Our experts are here to answer your questions, support you, and guide you through all your projects.